The Introduction Of Rock Texture Bathtub

Author:ZhaoQing JunDeRui New Material Technology Co., Ltd Click: Time:2025-01-10 19:13:10

1 This material is one of the artificial stone, it’s made of multiple composite materials layer by layer,  the surface of the product is covered with rich simulated natural stone’s concave and convex texture, plus 6-8mm  plate-like structure, so it’s called rock texture bathtub.

 

2 Because there are high-density fiber in the composite materials this product has a high strength, if it fell from 2-3 meters high, there will be no any structural damage or  crack, ordinary impact or hammers smash will not cause any damage to this product, even no trace. However, traditional artificial stone bathtub is easy to be damaged during transportation or handling, not to mention any powerful impact. (Salesman can use the hammer to beat the bathtub to show to the customer)

 

3 This product has good stain resistance, though there are rock texture on its cover, only because it has the stain resistance process, the surface is water-free, even use butter, red wine , lipstick etc, on its cover, it’s very easy to be cleaned, and there will be no other trace on it after clean. The trace after an ordinary shower, 99%  of dirty things will be cleaned by the shower rinse, if there is any stubborn stains , just wipe it easily with a rag. Even only clean this bath tub with water but without any kinds of detergent, its stain resistance could last for 8-10 years, after 10 years just gradually weaken, it will not disappear. Any stains can be cleaned with the help of a little cleaning agent.(Salesman can use the whiteboard pen or soy sauce to draw on the bathtub, then use a wet rag to clean it and show to the customer)

 

4 The surface of this product is very scratch-resistant, because it’s made of composite materials, the Pasteur hardness can be reached to 45-50, general scratches  can’t leave any marks, even use the key or scissors, needed to scratch it very hard to leave a mark, but the mark could be fixed just with the green cleaning cloth for the kitchen.(Salesman could use the keys or coins to test for the customers, then clean it.)

 

5 This product is in the line with China’s national standard JC-T-2116 and EU CE-EN14516 test standard, especially in 100℃ hot water with 100 hours no defects or transform or damage, it’s far ahead in this industry.

 

6 The depth edge of the inner bathtub is 450 mm, the center is 470 mm, and the optimal height of the water level during the composite ergonomic bath (most of the bathtub depths are 380 -420) two-level drainage and drainage slope, and the water in the tank is very small after drainage

(with video demonstration)

 

7 The high-flow overflow design can reach 35 liters per minute, so even if you forget to turn off the water and leave, the water will always be water

It will not overflow to the ground, and there are few similar designs in China and internationally.

 

8 Some people say that artificial stone bathtubs are expensive and weigh heavily (more than 100 kg), this product is not that heavy (60 males

Why is it not cheap?

Answer: The artificial stone tank is made by the process of resin and stone powder infusion, in which cheap stone powder (calcium carbonate) accounts for more than 60% of the raw materials, and the wall thickness is too thin to produce, even if the existing wall thickness is more than 10mm, it is easy to crack and break, because there is no high-density inorganic non-metal

Fiberglass can only be used to maintain strength by thickness and weight, so the impact strength is not high.

Moreover, the so-called 'stone' feeling of artificial stone can only come from the weight, and consumers or users cannot feel the weight when using it, so they can not feel any feeling related to 'stone', full of plastic feeling. The 'stone' of the rock texture bathtub design is that the consumer or user can see and touch it with the sense of sight and skin touch

The feeling of planting 'stones' and truly feeling nature in the bathroom.


图片展示
CUSTOMER SERVICE
-------------

 

  102, Building D4, West Zone, Zhong An Zhi Gu Industrial Zone, Jin Li Town, Gaoyao District, Zhaoqing, Guangdong, China.

86-13630185705

info@ricoli.cn

 


ZhaoQing JunDeRui New Material Technology Co., Ltd. © All Rights Reserved.

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了